Zone Offroad Adventure Series Lift kit for Chevy GMC 2500/3500 Pickup 3" 01-10

Description:
This new addition to the Adventure Series lineup of lift systems is built around the Zone Offroad heavy-duty replacement upper control arms already available for the 01-10 2500/3500 platform. The arms are made from 3/16" steel that is precision laser cut, formed and fully welded. Preinstalled MOOG brand ball joints and rubber bushings provide an easy installation and long service life. The ball joint is repositioned to compensate for the added lift and maintain a neutral position at ride height. To complement the improved upper ball joint angles, the kit address the other area often ignored at this lift height - the CV shafts. 

The new Adventure Series kit for the 01-10s includes a full differential drop system that relocates the differential down 2" for near stock angles at the 3" lift height. This is accomplished with a drop spacer on the passenger's side, (2) drop brackets for the front driver's mount and a integrated "half crossmember" for the driver's rear mount. A new different skid plate is included to protect the differential in its new position. The rear is lifted via a 2" block and u-bolts. 

Front and rear Nitro shocks are included

Brand: Zone Offroad

Recommended Tire/Wheel: 33x12.50

Vehicle Fitment:
2001 - 2010 Chevy 2500HD Pickup 4wd*
2001 - 2010 Chevy 3500HD Pickup 4wd*
2001 - 2006 Chevy Avalanche 2500 4wd*
2001 - 2006 Chevy Suburban 2500 4wd*
2001 - 2010 GMC 2500HD Pickup 4wd*
2001 - 2010 GMC 3500HD Pickup 4wd*
2001 - 2006 GMC Yukon XL 2500 4wd*

Features & Benefits:

• Fully welded, heavy duty upper control arms that dwarf the factory arms.
• Preinstalled replaceable MOOG brand ball joints and rubber bushings.
• Reposititioned ball joints to maintain a nuetral angle with added lift.
• Full differential drop system included to maintain proper CV shaft angles.
• Differential skid plate included.
• Rear height is adjusted with 2" blocks.

Notes:

• *Must first verify which RPO codes are shown in the glovebox to determine factory installed torsion keys (example picture included). This kit will fit the following RPO codes: FT2 - FT3 - FT4 - FT5 - FT6 - FT7. Vehicles with different codes will require a different kit, please message us for details.
• Frame bracket mount modification required
• Torsion bar unloading/loading tool required
• Will not fit dually models