Chevy GMC Silverado Sierra 1500 6.5" Suspension Lift 2014-2017 2WD (C34)

Description:
The 6.5'' system for the 2WD 1/2-ton GM trucks mimics the geometry of the tried and true, FMVSS No.126 compliant 4WD lift systems. The kits include a pair of fully boxed heavy duty crossmembers and robust ductile iron steering knuckles engineered to work with the redesigned steering rack. This coupled with the crossmember braces creates an incredibly strong front subframe designed to correct suspension geometry while increasing ground clearance. To retain factory ride quality a pair of bolt-on strut spacers are used to provide lift. These install easily without the need to disassemble the factory strut. Also included in the kit are brake line brackets, sway bar relocation, rear 5'' blocks, u-bolts, your choice of hydro or nitro rear shocks and all the necessary hardware to complete the install. 

Optional accessories for this lift kit include Zone front skid plate and rear add-a-leaf kit and are available separately. As with all Zone kits, this 6.5'' system is backed by Zone's limited lifetime warranty, FMVSS No.126 ESC system compliance, and 5-year 60,000-mile drivetrain protection through 560plus.com.

Brand: Zone Offroad

Recommended Tire/Wheel: 35x12.50

Vehicle Fitment:
2014 - 2017 Chevrolet Silverado 1500 2wd*
2014 - 2017 GMC Sierra 1500 2wd*

*Models w/ CAST ALUMINUM & STAMPED STEEL control arms ONLY

Features & Benefits:

• FMVSS No.126 (ESC system test) Compliant
• Over 98% Made in the USA - not a cheap import
• Ductile Iron, CNC machined steering knuckles maintain OE steering and ball joint geometry and allow fitment of 17" wheels
• Properly corrects suspension geometry and allows for larger wheels/tires
• Heavy duty boxed one piece crossmembers that maintain a clean look
• Crossmember support struts included for maximum subframe strength
• Weld-in control arm pocket plate included
• Rear solid cast iron blocks
• Works with factory Stabilitrak System
• Includes Nitro shocks

Notes:

• Must know is vehicle is equipped with cast steel, cast aluminum or stamped steel control arms
• To reduce trimming required for tire fitment, a 20" wheel w/ 5.75" backspacing is recommended
• Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference